Every time!DSafetyGuy wrote: ↑Fri Feb 05, 2021 4:39 pmSame here. My favorite part is for bigger things when we have a contractor or the like over. Dude always looks at me and I point and say, "Talk to her, she's the one who knows what's going on."Giff wrote: ↑Fri Feb 05, 2021 12:49 pmMy wife is definitely the fix-it person around here. No shame at all here.sancarlos wrote: ↑Fri Feb 05, 2021 12:15 pm Over the past week while I was out of town, my wife used YouTube videos to: A) fix the clothes dryer, and B) change the switch in a lamp.
Some men might feel emasculated by this. I just say “you go, girl!” She was really proud of herself and im happy it’s done. Saved a bunch of money and work for me, so we’ll get a nice dinner to celebrate.
Home Repairs
Moderators: Shirley, Sabo, brian, rass, DaveInSeattle
Re: Home Repairs
well this is gonna be someone's new signature - bronto
- Steve of phpBB
- The Dude
- Posts: 8488
- Joined: Mon Mar 11, 2013 10:44 am
- Location: Feeling gravity's pull
Re: Home Repairs
My wife is definitely the brains of the outfit for us too. But she doesn’t want to deal with contractors. So it ends being them asking me questions and me saying “Let me talk to my wife.”
And his one problem is he didn’t go to Russia that night because he had extracurricular activities, and they froze to death.
- The Sybian
- The Dude
- Posts: 18940
- Joined: Tue Mar 19, 2013 10:36 am
- Location: Working in the Crap Part of Jersey
Re: Home Repairs
It's weird, my father really knew how to work on cars (until the computerized), but he never did much work in the house. He always said Jesus was the last Jew to make a living working with his hands, or "we pay people to do this stuff for us." The only fight I ever saw my parents have is when my father attempted to fix a leaky sink. He didn't turn the water off first, tapped the supply line with his wrench, and it disintegrated, spewing water every where until he could shut the line. I've realized that is the reason I get ridiculous anxiety before fixing anything. That, and my wife freaks out screaming not to try because I'll make it worse. Her father literally can't change a light bulb. Her mother will occasionally change lightbulbs, but they call an electrician. Because of that, she doesn't believe things are easy fixes, and gets mad that I don't freak out when something is minor, like a lose screw causing a cabinet door to wobble. Youtube has me realizing how easy most repairs are, and I really enjoy fixing things, and I really like putting in dimmer switches. I should have been an electrician. It's fun!Nonlinear FC wrote: ↑Fri Feb 05, 2021 2:37 pm Man, I wish. I wasn't raised with a dad teaching me how to do shit, so it's all self-taught. A lot of it had to be learned before YouTube was such an awesome tool.
Wife grew up with a somewhat handy dad and 2 older brothers. Fixing stuff just isn't her jam. I mostly don't mind it, but I sometimes feel the pressure because if I don't fix something --> $$ and I'm worried about breaking things irreparably.
She's very cool about the tension and always reminds me that the worst thing is that I can't fix something and we bring someone in. If I do fix it --> $$
Anyways, my dishwasher is broken. That's above my pay grade.
So my father never taught me much beyond how to use a screwdriver. And when it came to things like putting together furniture, my mother did it because she liked to and he would get frustrated, and doesn't believe in reading directions. My father did teach me the basics of car repairs. When I was 14 or 15, he made me take off tires and put them back on to learn. He taught me how to jump a car, change the oil, replace and check all fluids... My father inlaw needed a new batter a couple years ago and I offered to pick one up and put it in for him. He started yelling that it's too dangerous, I shouldn't be doing it, he'll get a tow truck to bring it in. So yeah, I see why my wife gets nervous. A couple years ago I had my side mirror damaged, and the electronic adjustment didn't work. I found a website that linked to junkyards across the country, you put in the make, model, year and color, and get quotes from various junkyards. Found a match and saved a ton off what the dealer was charging.
An honest to God cult of personality - formed around a failed steak salesman.
-Pruitt
-Pruitt
Re: Home Repairs
Youtube homie. Don't be scared. But I do appreciate a man that throws I the towel before he runs a machine into the ditch.
- The Sybian
- The Dude
- Posts: 18940
- Joined: Tue Mar 19, 2013 10:36 am
- Location: Working in the Crap Part of Jersey
Re: Home Repairs
Bought some carb cleaner spray and the ignition spray. Do I need to take out the carb to spray the cleaner, or just spray it in the air intake?BSF21 wrote: ↑Mon Feb 01, 2021 10:44 pmI run Stabil through mine before winter hits then splash them with fresh gas in the spring. In a pinch have someone spray crab cleaner in the carb as you’re starting it. Loud but effective.The Sybian wrote: ↑Mon Feb 01, 2021 8:59 pm Anyone ever try to clean a carburetor on a snowblower (or any gas engine, for that matter). Seems like it should be easy enough, I'm just afraid of not getting it back together, or not knowing if I broke it. I usually forget to drain the gas or add fuel stabilizer at the end of seasons. Usually, first snow or first time using the leaf blower, it takes a while to get it started. Today, I couldn't get it at all. I'm assuming it's the carburetor. Really pissed, as last storm, I tried getting it going and after about 10 pulls, the chord broke. I replaced it, got the blower started on the first pull and let it run for 5-10 minutes. Figured I'd be good to go. Nope. I found a repair guy who drives to your house, might have to give him a call. I had to have the carburetor replace on my power washer last year.
So, is it me? Am I fucking up by leaving gas in the machines during off seasons? Do you guys regularly clean out carburetors or tuneups on equipment?
With the ignition spray, it says to spray in the air intake. Does that require removing the plastic panel the primer bulb is on? Prime it first, remove panel, spray and start? Read a ton of answers to this question, but none answer this. One guy asked 20 times, and everyone answering just says in the intake. Another storm tomorrow, and new blower not coming until Tuesday.
An honest to God cult of personality - formed around a failed steak salesman.
-Pruitt
-Pruitt
Re: Home Repairs
So I do this on my mower, but I take off the air filter cover and remove the air filter and the carb intake is right behind that. Crescent shaped holes. Don’t need a lot, spritz it and pull or like I said have wife or buddy spritz, wait half a second and pull. Let it run and get some new fuel through the lines. Might have to do it 2 or 3 times before it stays up. Replace filter and you’re good to go.The Sybian wrote: ↑Sat Feb 06, 2021 11:01 pmBought some carb cleaner spray and the ignition spray. Do I need to take out the carb to spray the cleaner, or just spray it in the air intake?BSF21 wrote: ↑Mon Feb 01, 2021 10:44 pmI run Stabil through mine before winter hits then splash them with fresh gas in the spring. In a pinch have someone spray crab cleaner in the carb as you’re starting it. Loud but effective.The Sybian wrote: ↑Mon Feb 01, 2021 8:59 pm Anyone ever try to clean a carburetor on a snowblower (or any gas engine, for that matter). Seems like it should be easy enough, I'm just afraid of not getting it back together, or not knowing if I broke it. I usually forget to drain the gas or add fuel stabilizer at the end of seasons. Usually, first snow or first time using the leaf blower, it takes a while to get it started. Today, I couldn't get it at all. I'm assuming it's the carburetor. Really pissed, as last storm, I tried getting it going and after about 10 pulls, the chord broke. I replaced it, got the blower started on the first pull and let it run for 5-10 minutes. Figured I'd be good to go. Nope. I found a repair guy who drives to your house, might have to give him a call. I had to have the carburetor replace on my power washer last year.
So, is it me? Am I fucking up by leaving gas in the machines during off seasons? Do you guys regularly clean out carburetors or tuneups on equipment?
With the ignition spray, it says to spray in the air intake. Does that require removing the plastic panel the primer bulb is on? Prime it first, remove panel, spray and start? Read a ton of answers to this question, but none answer this. One guy asked 20 times, and everyone answering just says in the intake. Another storm tomorrow, and new blower not coming until Tuesday.
Dances with Wolves (1) - BSF
"This place was rockin'," said BSF21.
"There is nothing ever uncommon about BSF21."
"This place was rockin'," said BSF21.
"There is nothing ever uncommon about BSF21."
Re: Home Repairs
I don’t know the difference between ignition and carb cleaner but I use carb cleaner for thisBSF21 wrote: ↑Sun Feb 07, 2021 10:49 amSo I do this on my mower, but I take off the air filter cover and remove the air filter and the carb intake is right behind that. Crescent shaped holes. Don’t need a lot, spritz it and pull or like I said have wife or buddy spritz, wait half a second and pull. Let it run and get some new fuel through the lines. Might have to do it 2 or 3 times before it stays up. Replace filter and you’re good to go.The Sybian wrote: ↑Sat Feb 06, 2021 11:01 pmBought some carb cleaner spray and the ignition spray. Do I need to take out the carb to spray the cleaner, or just spray it in the air intake?BSF21 wrote: ↑Mon Feb 01, 2021 10:44 pmI run Stabil through mine before winter hits then splash them with fresh gas in the spring. In a pinch have someone spray crab cleaner in the carb as you’re starting it. Loud but effective.The Sybian wrote: ↑Mon Feb 01, 2021 8:59 pm Anyone ever try to clean a carburetor on a snowblower (or any gas engine, for that matter). Seems like it should be easy enough, I'm just afraid of not getting it back together, or not knowing if I broke it. I usually forget to drain the gas or add fuel stabilizer at the end of seasons. Usually, first snow or first time using the leaf blower, it takes a while to get it started. Today, I couldn't get it at all. I'm assuming it's the carburetor. Really pissed, as last storm, I tried getting it going and after about 10 pulls, the chord broke. I replaced it, got the blower started on the first pull and let it run for 5-10 minutes. Figured I'd be good to go. Nope. I found a repair guy who drives to your house, might have to give him a call. I had to have the carburetor replace on my power washer last year.
So, is it me? Am I fucking up by leaving gas in the machines during off seasons? Do you guys regularly clean out carburetors or tuneups on equipment?
With the ignition spray, it says to spray in the air intake. Does that require removing the plastic panel the primer bulb is on? Prime it first, remove panel, spray and start? Read a ton of answers to this question, but none answer this. One guy asked 20 times, and everyone answering just says in the intake. Another storm tomorrow, and new blower not coming until Tuesday.
Also dumb pro tip, check that your spark plugs are firmly attached. This this last year and couldn’t for the life of me figure out why this trick wasn’t working. I had disconnected the spark plug for winter...
Dances with Wolves (1) - BSF
"This place was rockin'," said BSF21.
"There is nothing ever uncommon about BSF21."
"This place was rockin'," said BSF21.
"There is nothing ever uncommon about BSF21."
- The Sybian
- The Dude
- Posts: 18940
- Joined: Tue Mar 19, 2013 10:36 am
- Location: Working in the Crap Part of Jersey
Re: Home Repairs
Starter spray is what I meant. Getting combustible into the carb as opposed to a a carb cleaning spray to remove debris.BSF21 wrote: ↑Sun Feb 07, 2021 10:51 amI don’t know the difference between ignition and carb cleaner but I use carb cleaner for thisBSF21 wrote: ↑Sun Feb 07, 2021 10:49 amSo I do this on my mower, but I take off the air filter cover and remove the air filter and the carb intake is right behind that. Crescent shaped holes. Don’t need a lot, spritz it and pull or like I said have wife or buddy spritz, wait half a second and pull. Let it run and get some new fuel through the lines. Might have to do it 2 or 3 times before it stays up. Replace filter and you’re good to go.The Sybian wrote: ↑Sat Feb 06, 2021 11:01 pmBought some carb cleaner spray and the ignition spray. Do I need to take out the carb to spray the cleaner, or just spray it in the air intake?BSF21 wrote: ↑Mon Feb 01, 2021 10:44 pmI run Stabil through mine before winter hits then splash them with fresh gas in the spring. In a pinch have someone spray crab cleaner in the carb as you’re starting it. Loud but effective.The Sybian wrote: ↑Mon Feb 01, 2021 8:59 pm Anyone ever try to clean a carburetor on a snowblower (or any gas engine, for that matter). Seems like it should be easy enough, I'm just afraid of not getting it back together, or not knowing if I broke it. I usually forget to drain the gas or add fuel stabilizer at the end of seasons. Usually, first snow or first time using the leaf blower, it takes a while to get it started. Today, I couldn't get it at all. I'm assuming it's the carburetor. Really pissed, as last storm, I tried getting it going and after about 10 pulls, the chord broke. I replaced it, got the blower started on the first pull and let it run for 5-10 minutes. Figured I'd be good to go. Nope. I found a repair guy who drives to your house, might have to give him a call. I had to have the carburetor replace on my power washer last year.
So, is it me? Am I fucking up by leaving gas in the machines during off seasons? Do you guys regularly clean out carburetors or tuneups on equipment?
With the ignition spray, it says to spray in the air intake. Does that require removing the plastic panel the primer bulb is on? Prime it first, remove panel, spray and start? Read a ton of answers to this question, but none answer this. One guy asked 20 times, and everyone answering just says in the intake. Another storm tomorrow, and new blower not coming until Tuesday.
Also dumb pro tip, check that your spark plugs are firmly attached. This this last year and couldn’t for the life of me figure out why this trick wasn’t working. I had disconnected the spark plug for winter...
An honest to God cult of personality - formed around a failed steak salesman.
-Pruitt
-Pruitt
- The Sybian
- The Dude
- Posts: 18940
- Joined: Tue Mar 19, 2013 10:36 am
- Location: Working in the Crap Part of Jersey
Re: Home Repairs
Where has ignition spray been all my life? The answer is, you do not need to open the carburetor or remove the plate to spray it into a line. Just sprayed the general area where the carburetor bowl sits. First pull, like magic. It sounded different than it ever has starting up, there was a dark grey plume and I needed to keep the choke open for 30 seconds otherwise it'd stall out. It was surging and sounded bad until I ran it empty. Filled the tank, started right up and sounded normal!
I ordered a new blower which already shipped. Need to decide if I just sell the old one or try to cancel the order. New one is electric start, so I think that ends the discussion.
Thanks to BSF and others for the advice.
I ordered a new blower which already shipped. Need to decide if I just sell the old one or try to cancel the order. New one is electric start, so I think that ends the discussion.
Thanks to BSF and others for the advice.
An honest to God cult of personality - formed around a failed steak salesman.
-Pruitt
-Pruitt
- DaveInSeattle
- The Dude
- Posts: 8485
- Joined: Mon Mar 18, 2013 5:51 am
- Location: Seattle, WA
Re: Home Repairs
Here's a question: We just had a guy (and his crew) do a bit of work rebuilding a retaining wall/fence in our backyard. They did a good job...and we'll probably hire them again to do the fence in the front of the house.
Should we tip them? How much?
Should we tip them? How much?
- govmentchedda
- The Dude
- Posts: 12741
- Joined: Mon Mar 11, 2013 4:36 pm
Re: Home Repairs
What did the job cost? How many in the crew?DaveInSeattle wrote: ↑Sun Feb 07, 2021 11:30 pm Here's a question: We just had a guy (and his crew) do a bit of work rebuilding a retaining wall/fence in our backyard. They did a good job...and we'll probably hire them again to do the fence in the front of the house.
Should we tip them? How much?
Until everything is less insane, I'm mixing weed with wine.
- DaveInSeattle
- The Dude
- Posts: 8485
- Joined: Mon Mar 18, 2013 5:51 am
- Location: Seattle, WA
Re: Home Repairs
About 6K...there would usually be 3 or 4 guys...govmentchedda wrote: ↑Mon Feb 08, 2021 8:21 amWhat did the job cost? How many in the crew?DaveInSeattle wrote: ↑Sun Feb 07, 2021 11:30 pm Here's a question: We just had a guy (and his crew) do a bit of work rebuilding a retaining wall/fence in our backyard. They did a good job...and we'll probably hire them again to do the fence in the front of the house.
Should we tip them? How much?
- Nonlinear FC
- The Dude
- Posts: 10846
- Joined: Mon Apr 01, 2013 2:09 pm
Re: Home Repairs
I'd have a tough time tipping in that scenario. The way I've dealt with that in the past is to ask them what they like to drink (for hydration) and to order up lunch.
You can lead a horse to fish, but you can't fish out a horse.
Re: Home Repairs
Isn't hiring them again the bonus here?
After getting my kitchen redone and paying $$$$ for it, no way in hell am I going to tip something like contractor work.
After getting my kitchen redone and paying $$$$ for it, no way in hell am I going to tip something like contractor work.
mister d wrote:Couldn't have pegged me better.
EnochRoot wrote:I mean, whatever. Johnnie's all hot cuz I ride him.
Re: Home Repairs
I typically don't tip contractor types because the cost is very high to start off with and there is work done by people I never see. I will supply cold drinks/coffee. Working at home makes that easier. I've made some extra pots of coffee and set it up on the porch for them to use. I will try and tip other work. Movers, landscapers, delivery people, etc... For that type of work it's usually $50 if they are there the whole day or $20 is it's something less than that.
- Pruitt
- The Dude
- Posts: 18105
- Joined: Tue Jun 04, 2013 10:02 am
- Location: North Shore of Lake Ontario
Re: Home Repairs
I'm re-caulking a bathtub. How much caulk should I get, a small tube or one of the big cannisters?
"beautiful, with an exotic-yet-familiar facial structure and an arresting gaze."
Re: Home Repairs
One small tube should be enough.
I would like expensive whiskey.
We only have beer & wine...
What am I, 12?
We only have beer & wine...
What am I, 12?
- Pruitt
- The Dude
- Posts: 18105
- Joined: Tue Jun 04, 2013 10:02 am
- Location: North Shore of Lake Ontario
Re: Home Repairs
Aces!
Thanks.
Thanks.
"beautiful, with an exotic-yet-familiar facial structure and an arresting gaze."
- Steve of phpBB
- The Dude
- Posts: 8488
- Joined: Mon Mar 11, 2013 10:44 am
- Location: Feeling gravity's pull
Re: Home Repairs
I originally posted this in the Weather thread, but now my wife has raised the concern that having these huge icicles hanging from the corner of the roof could be bad for the roof. Does anyone know if that's true? Or what I could do about it? I think trying to break the icicles would be even more dangerous for the roof. But I do have a propane heater that I could try to use to melt the icicles off halfway down.
Though then I'd be afraid about burning the whole place down.
Though then I'd be afraid about burning the whole place down.
And his one problem is he didn’t go to Russia that night because he had extracurricular activities, and they froze to death.
Re: Home Repairs
They could rip off your gutters and drip edging if they get too heavy. Try breaking off smaller pieces at the end and gradually work your way up. A chain saw would be a good tool for this.
THERE’S NOTHING WRONG WITH GALA LUNCHEONS, LAD!
- Steve of phpBB
- The Dude
- Posts: 8488
- Joined: Mon Mar 11, 2013 10:44 am
- Location: Feeling gravity's pull
Re: Home Repairs
I have a cheap electric chainsaw I got from Lowes. Will that be okay to cut into solid ice?
And his one problem is he didn’t go to Russia that night because he had extracurricular activities, and they froze to death.
- A_B
- The Dude
- Posts: 23423
- Joined: Mon Mar 11, 2013 7:36 am
- Location: Getting them boards like a wolf in the chicken pen.
Re: Home Repairs
Fuckin A that sounds like fun.Steve of phpBB wrote: ↑Thu Feb 25, 2021 3:45 pmI have a cheap electric chainsaw I got from Lowes. Will that be okay to cut into solid ice?
You know what you need? A lyrical sucker punch to the face.
Re: Home Repairs
That'd be a good swamp walk-off post.
Re: Home Repairs
Only one way to find out.....Steve of phpBB wrote: ↑Thu Feb 25, 2021 3:45 pmI have a cheap electric chainsaw I got from Lowes. Will that be okay to cut into solid ice?
Two weeks later Steve reporting side hustle
or at minimum ice luges for college kids (that is covid safe right?)
Re: Home Repairs
Just be careful...
mister d wrote:Couldn't have pegged me better.
EnochRoot wrote:I mean, whatever. Johnnie's all hot cuz I ride him.
- Steve of phpBB
- The Dude
- Posts: 8488
- Joined: Mon Mar 11, 2013 10:44 am
- Location: Feeling gravity's pull
Re: Home Repairs
Yeah, this’ll be an adventure. I don’t think I can reach the monstrosity with a chain-saw from my deck. Or from the ground. So the propane flamethrower is probably my only option.
And his one problem is he didn’t go to Russia that night because he had extracurricular activities, and they froze to death.
- The Sybian
- The Dude
- Posts: 18940
- Joined: Tue Mar 19, 2013 10:36 am
- Location: Working in the Crap Part of Jersey
Re: Home Repairs
propane flamethrower is almost always the best tool for the job.Steve of phpBB wrote: ↑Fri Feb 26, 2021 9:36 am Yeah, this’ll be an adventure. I don’t think I can reach the monstrosity with a chain-saw from my deck. Or from the ground. So the propane flamethrower is probably my only option.
An honest to God cult of personality - formed around a failed steak salesman.
-Pruitt
-Pruitt
Re: Home Repairs
Just holding a spot here for the structure fire in Utah article.
Dances with Wolves (1) - BSF
"This place was rockin'," said BSF21.
"There is nothing ever uncommon about BSF21."
"This place was rockin'," said BSF21.
"There is nothing ever uncommon about BSF21."
Re: Home Repairs
I am bummed I did not try to get one of them Boring Not a Flamethrowers...on the other hand my co-workers husband got one...she was very not happy about it.
- Steve of phpBB
- The Dude
- Posts: 8488
- Joined: Mon Mar 11, 2013 10:44 am
- Location: Feeling gravity's pull
Re: Home Repairs
Yeah ... about five years ago my neighbor blew up his house using a propane flamethrower to melt ice. He was apparently melting ice from some pipes and his garage caught fire. And this being Utah, he had a bunch of ammo in his garage.
No one was hurt, and the house has since been rebuilt. So I figure I'm fine, right?
And his one problem is he didn’t go to Russia that night because he had extracurricular activities, and they froze to death.
Re: Home Repairs
I mean I'd delete this talk before the insurance claim but sure.Steve of phpBB wrote: ↑Fri Feb 26, 2021 12:25 pmYeah ... about five years ago my neighbor blew up his house using a propane flamethrower to melt ice. He was apparently melting ice from some pipes and his garage caught fire. And this being Utah, he had a bunch of ammo in his garage.
No one was hurt, and the house has since been rebuilt. So I figure I'm fine, right?
My guess is on the corner there isn't as huge an issue since it's not pulling on the gutters or the soffit straight down like in some of those videos but you wanna play Hank Scorpio, I say go nuts.
Dances with Wolves (1) - BSF
"This place was rockin'," said BSF21.
"There is nothing ever uncommon about BSF21."
"This place was rockin'," said BSF21.
"There is nothing ever uncommon about BSF21."
- Steve of phpBB
- The Dude
- Posts: 8488
- Joined: Mon Mar 11, 2013 10:44 am
- Location: Feeling gravity's pull
Re: Home Repairs
Yeah, for all I know it's like this every year and I just haven't been up there enough in the winter to notice. The guy who built the place was a carpenter/woodworker and seemed pretty thorough, so I imagine it's probably fine.BSF21 wrote: ↑Fri Feb 26, 2021 12:36 pmI mean I'd delete this talk before the insurance claim but sure.Steve of phpBB wrote: ↑Fri Feb 26, 2021 12:25 pmYeah ... about five years ago my neighbor blew up his house using a propane flamethrower to melt ice. He was apparently melting ice from some pipes and his garage caught fire. And this being Utah, he had a bunch of ammo in his garage.
No one was hurt, and the house has since been rebuilt. So I figure I'm fine, right?
My guess is on the corner there isn't as huge an issue since it's not pulling on the gutters or the soffit straight down like in some of those videos but you wanna play Hank Scorpio, I say go nuts.
On the other hand, if I have an excuse to use the flamethrower, it'd be irresponsible not to.
And his one problem is he didn’t go to Russia that night because he had extracurricular activities, and they froze to death.
Re: Home Repairs
What about a super soaker and de-icing fluid?
mister d wrote:Couldn't have pegged me better.
EnochRoot wrote:I mean, whatever. Johnnie's all hot cuz I ride him.
- A_B
- The Dude
- Posts: 23423
- Joined: Mon Mar 11, 2013 7:36 am
- Location: Getting them boards like a wolf in the chicken pen.
Re: Home Repairs
Might work, but Steve isn’t as young as he used to be.
You know what you need? A lyrical sucker punch to the face.
Re: Home Repairs
I know. He took your fluid to melt ice.
mister d wrote:Couldn't have pegged me better.
EnochRoot wrote:I mean, whatever. Johnnie's all hot cuz I ride him.
- Pruitt
- The Dude
- Posts: 18105
- Joined: Tue Jun 04, 2013 10:02 am
- Location: North Shore of Lake Ontario
Re: Home Repairs
I would watch a live stream of this event.
"beautiful, with an exotic-yet-familiar facial structure and an arresting gaze."
Re: Home Repairs
Hydrant seems to have sink in our neighbors yard and caused us to have no water pressure. Been going on for an hour.
https://drive.google.com/file/d/12MISYs ... p=drivesdk
https://drive.google.com/file/d/12HLFC4 ... p=drivesdk
https://drive.google.com/file/d/12MISYs ... p=drivesdk
https://drive.google.com/file/d/12HLFC4 ... p=drivesdk
To quote both Bruce Prichard and Tony Schiavone, "Fuck Duff Meltzer."
- Steve of phpBB
- The Dude
- Posts: 8488
- Joined: Mon Mar 11, 2013 10:44 am
- Location: Feeling gravity's pull
Re: Home Repairs
Oh fuck. I hope you’re not downslope from that.duff wrote: ↑Mon Mar 01, 2021 9:52 pm Hydrant seems to have sink in our neighbors yard and caused us to have no water pressure. Been going on for an hour.
https://drive.google.com/file/d/12MISYs ... p=drivesdk
https://drive.google.com/file/d/12HLFC4 ... p=drivesdk
And his one problem is he didn’t go to Russia that night because he had extracurricular activities, and they froze to death.